CTS10 - Complete Wheel Truing System for Tormek, Jet, Grizzly, Scheppach and Others

Complete Wheel Truing System (#CTS10)
TallowTree's #TTA-1 Truing Tool Advancer plus DT-1 Diamond Truing Tool Jig.

Compare CTS10 and TT-50 Truing Tool Systems:

TallowTree
CTS10

Tormek
TT-50

Comments

For Use On Similar Sharpeners Other Than Tormek

CTS10 Works On Most Wet Grinding Systems*
TT-50 Designed To Work On Tormek Grinders Only.

Complete Truing/Dressing Speed Control

CTS10 - Extremely Smooth Finish At Slow Feed Rates.
TT-50 - Vibration (Chattering) Occurs At Slower Feed Rates. Tormek Warns Users About This Condition In Instructions.

Forward/Reverse Wheel Truing

CTS10 - One Light Pass Is Usually Sufficient To Restore Wheel Surface. Won't Cause Wheel Edge Chipping.

Rough Wheel Dress For Aggressive Grinding

CTS10 Complete Control At Any Dress Speed.

Smooth Wheel Dress For Fine Edge Grinding

CTS10 Little Or No Stone Grading Needed After Wheel Dress.
TT-50 Minimum Feed Rate Of Truing Tool Is Too Fast For Quality Wheel Dressing. Leaves Uneven Wheel Surface Finish. Stone Grading Always Required Before Resuming Normal Sharpening.

Quick, Easy Setup

CTS10 Works On Any Universal Support. Installs In Seconds.
TT-50 Tormek recommends purchase of new Universal Support (US-105). Complicated Setup. Multiple Steps Before Truing Begins.

Easy To Use

CTS10 Installs in seconds. Easy setup.

Light, Clean Cuts - Less Wheel Waste

CTS10 Easily Make Very Light Cuts To Restore Surface. Saves Expensive Grinding Wheels And Stone Graders.
TT-50 Requires A Deeper Cut In Order To Work. Increases Wheel Wear And Shortens Wheel Life.

A Must For 800-4000 grit Japanese Water Stones

CTS10 Dresses Softer Japanese Water Stones To Perfection. Leaves Very Smooth Surface With Minimal Wheel Surface Removal.
TT-50 Not Recommended For Use On This Type Of
Grinding Wheel.

"Mr. Voigt,
I did receive the Truing Tool System and used it to true up my Tormek grinding wheel. It was easy to set up and get the hang of. It did a wonderful job on a wheel that was quite out of round. The Truing Tool System is definitely an excellent investment for my sharpening shop. I'm very pleased with it. Thank you very much."
Al S.
Negaunee, MI USA
Read more actual customer's feedback here!

We have been in the precision grinding business for over 30 years
and we take grinding wheels seriously.

Your Grinding Wheel Truing Tool Is An Investment In The Quality Of Your Work.
Use This System Once, And You Will Wonder Why You Used Anything Else.
Hopefully you still have the box to return your present truing tool back for a refund!

ORDER HERE